SDT Sherlog Kit Master SDT270, Technical And User'S Instruction Manual

Page: 41 / 61

File name: MAN.MAS.EN‐‐02X‐‐Sherlog‐Master‐user‐manual‐Eng.docx
41/60
Step Screen ( Icon / Text mode) Key Action
19
When you hear a sound, press the
M key to freeze the measured value.

Press the M key repeatedly to refresh the frozen measured
value.
20
Press the save key to store the measurement.
21 Select the leak type (see icon codes below)

Use the arrow keys to switch between the different types.

Press the enter key to confirm.
Symbol Text Symbol Text
Open Hatch
IN
Open Hatch END
Spot Leak Ventilator
Linear Leak Loading Port
Drain
Step Screen Key Action
22 Enter the location of the leak on the screen.

Use the arrow keys the move the cursor around.

Press the enter key to confirm.

Press function key F1 ( Exit ) to go back to the previous screen.
23 An additional comment can be added to the leak.

Press the enter key to confirm.
24 During the save action a confirmation screen is shown.
25
The basic measurement screen is once again displayed.
Repeat steps 17 to 25 until all leaks are spotted.
Symbols showing possible leak types.