SDT Sherlog Kit Master SDT270, Technical And User'S Instruction Manual

Page: 42 / 61

File name: MAN.MAS.EN‐‐02X‐‐Sherlog‐Master‐user‐manual‐Eng.docx
42/60
15.3.6 Storing the Open Hatch End Value
End the tightness test of each hatch of the hold in question by measuring the OHV End (Open Hatch End Value). Doing
so will confirm proper functioning of the equipment since the start up to completion of the test on the hatch in
question. Moreover, and without making this OHV End measurement, the operator will not be allowed to continue his
survey and start a test on the next hatch.
Proceed as follows:
Step Screen ( Icon / Text mode) Key Action
26

Use the up and down keys to adjust the receiver’s amplification
level.

Press the M key (repeatedly) to freeze a representative Open
Hatch End Value.
27 Press the save key to store the measurement.
28
Select / Open Hatch END
Press the enter key to confirm.
29 Enter the location of the measured Open Hatch End Value on the
screen.

Use the arrow keys the move the cursor around.

Press the enter key to confirm.
30 During the save action a confirmation screen is shown.
31 Select one of the following options:

Return to the measurement screen to add an additional OHV
End value.

Go to the Hold‐Hatch information screen to add a new hold /
hatch.

View the survey data.

End the survey.
Symbol Text Function
Goto Hold Hatch Add a new Hold and/or Hatch to continue the survey.
Go to step 9.
End Survey End the survey and return to the Sherlog main menu.
Go to step 3.
View Survey Data Browse through all tested holds and hatches of this survey.

Use up and down arrow keys to browse the holds and hatches

Use left and right arrow keys to browse the different measurements of
a hatch.
See 10.2.1 Browse survey data