SDT Sherlog Kit Master SDT270, Technical And User'S Instruction Manual

Page: 28 / 61

File name: MAN.MAS.EN‐‐02X‐‐Sherlog‐Master‐user‐manual‐Eng.docx
28/60
Symbol Function
Open hatch Start measurement
Open hatch End measurement
Spot leak
Linear leak
Drain
Ventilator
Loading port
The position of the symbol in the drawing is a reference to the location of the item and it’s measurement on the hatch.
The information bar at the bottom of the screen gives more details about the selected measurement:

Hold number

Hatch number (sub‐hatch number)

Measured value

Used Amplification
When a hatch is too large to be tested at one time, it can be virtually divided into 2 or 3 equal parts/volumes. For every
hatch part, the hatch cover test procedure is followed (this means that every part is to be considered as a new
hold/hatch and that the complete procedure as for a new hatch has to be followed)
The active keys are:
Key Function
Scroll up and down through all holds and hatches of the
survey.
Scroll through all the measurements on the screen.
Function key F1

Exit the browse screen menu.
10.2.2 Resume a survey
Once the survey which is still in progress has been selected from the list of surveys, press function key F2 ( ) to
resume the survey.
No existing data can be deleted or changed. Only an in‐progress "hatch cover test" (illustrated by an “open” padlock)
can be completed or a new hatch can be selected and added.
When all hatches of a survey have an open hatch end value, and this survey is selected to resume, the screen
automatically adds a new hold +1 (from #3 you will then see #4)