background image

 
VERSO 50_v1.0.27_EN                                        33502027401_3_1                                                  page 14/24 

2- 4  M3 - Test setup 

 

POS. 

NAME 

DESCRIPTION 

RANGE OF VALUES 

DEFAULT 

SETTINGS 

Enable test 1 

Used to enable or disable the automatic test. 

On-Off 

Off 

Test type 

To set the type of test. 

Daily-Weekly-Monthly 

Weekly 

Day of week 

If the type of test is chosen weekly, it permits to set the 
day of the week in which the test should be done. 

Mond., Tuesd., Wed., 

Thur., Frid., Sat, Sund. 

Thur. 

Day of month 

If the type of test is chosen monthly, it permits to set the 
day of the month in which the test should be done. 

1-31 

Start hour 

You set the hour of  test starting. 

0-23 

10 

Start min. 

You set the minute of test starting. 

0-59 

Enable test 2 

Used to enable or disable the automatic test. 

On-Off 

Off 

Test type 

To set the type of test. 

Daily-Weekly-Monthly 

Weekly 

Day of week 

If the type of test is chosen weekly, it permits to set the 
day of the week in which the test should be done. 

Mond., Tuesd., Wed., 

Thur., Frid., Sat, Sund. 

Thur. 

Day of month 

If the type of test is chosen monthly, it permits to set the 
day of the month in which the test should be done. 

1-31 

Start hour 

You set the hour of  test starting. 

0-23 

10 

Start min. 

You set the minute of test starting. 

0-59 

 

Also, you can set some parameters that are in common for the two tests: 

 

POS. 

NAME 

DESCRIPTION 

RANGE OF 

VALUES 

DEFAULT 

SETTINGS 

Test lenght 

You set the length time for the test. 

0-59 [min] 

10 

Test with load 

If you set it to ON, during the test, the switching between Mains 
and Genset should be done. 

On-Off 

Off 

 

 If the type of test is chosen Daily, you can set the days in which the test should be done: 

 

POS. 

NAME 

DESCRIPTION 

Sunday 

If the tick is present, it enables the daily test on Sunday. If the tick is removed, on this day the test is 
not executed. 

Monday 

If the tick is present, it enables the daily test on Monday. If the tick is removed, on this day the test is 
not executed. 

Tuesday 

If the tick is present, it enables the daily test on Tuesday. If the tick is removed, on this day the test 
is not executed. 

Wednesday 

If the tick is present, it enables the daily test on Wednesday. If the tick is removed, on this day the 
test is not executed. 

Thursday 

If the tick is present, it enables the daily test on Thursday. If the tick is removed, on this day the test 
is not executed. 

Friday 

If the tick is present, it enables the daily test on Friday. If the tick is removed, on this day the test is 
not executed. 

Saturday 

If the tick is present, it enables the daily test on Saturday. If the tick is removed, on this day the test 
is not executed. 

Summary of Contents for VERSO 50

























Reviews: