4.7.
Faults and repairs
Fault observed
Origin
Solutions
Erratic braking of trailer
- Faulty shock absorber
Replace the shock absorber
Braking too weak
- Jaws worn
Replace the jaws
- Jaws not run in
Fault will disappear only after running in
- Incorrect linkage setting
Adjust the setting
- Significant friction on the slide
Grease the sliding parts
- Slide corrosion
Remove the corrosion and grease
- Coupling height does not match that of
the towing vehicle
Adjust the height so that the two parts
are in the same horizontal plane
Drum temperature abnormally high
- Incorrect linkage setting
Adjust the settings
- Incorrect brake setting
Adjust the settings
- High levels of dust in the drums
Remove the dust
- Jaws, springs, drums damaged
Replace the damaged parts
- Brake cables or link rod damaged
Replace the damaged parts
Jerky braking
- Incorrect linkage setting
Adjust the settings
- Interfering parts on the slide
Remove, clean and grease
- Corroded slide
Remove the corrosion and grease
- Damage to slide guide rings
Replace the rings (and possibly the
slide) and grease
- Faulty shock absorber
Replace the shock absorber
Trailer tending to swerve upon braking
- Cross-bar(s) not balanced
Adjust the cross-bar(s)
- Different brake setting on the two sides
Adjust the brake settings
- Cables damaged or incorrectly fitted
Replace the damaged parts
Refit the cables
- Poor load distribution
Check the load distribution
When starting the trailer holds back the
towing vehicle
- Damage to slide or to guide rings
Replace the faulty parts and grease
- Slide corrosion
Remove the corrosion and grease
- Tie rod damaged
Replace the tie rod and adjust the
settings
- Linkage damaged or incorrectly set
Replace the damaged parts and adjust
the settings
- Brake on
Loosen the brake
Play in the coupling head
- Head worn (see wear indicator)
Replace the head
- Ball joint worn
Replace the ball joint
Parking braking too weak
- Compensating spring incorrectly set
Adjust the setting
- Braking system incorrectly set
Adjust the setting
- Notched sector damaged
Replace the sector and adjust the setting
- Lever ratchet worn
Replace the lever and adjust the setting
- Cable ruptured
Replace the cable and adjust the setting
31/285
Summary of Contents for R 340 U
