SCS PTC-IIex, Manual

Page: 61 / 220

6 Commands
6.23 CONType
Default setting: 3
Parameter: 0 Accepts no connects
1 Accepts only normal connects
2 Accepts only robust connects
3 Accepts all connects
CONType
defines which connect types the PTC-IIex accepts while in standby mode and
with this leadss to a connection to be established.
6.24 CSDelay
Remote
Default setting: 5
Parameter: X 1... 31, delay in X
•
5 msec.
Selection of time delay between the end of the RX packet, and start of the first CS data
bit. The time equals the value X multiplied by 5 milliseconds. The parameter influences
the response time (controls) of the RX at RX start. With a large value for
CSDelay
, even
transceivers that have slow transmit-receive switching can be used for PACTOR. The
maximum distance that can be covered is reduced due to the time delay caused by the
final speed of radio waves. DX is only possible with fast transmit-receive switching.
6.25 CTExt
Default setting: PTC-IIex DSP/QUICC System Maildrop QRV...
Parameter: String of 249 characters, maximum.
There is only one connect text for PACTOR and AMTOR. The Connect text is
transmitted when
CMsg
is set to 1 and the PTC receives a connect. In this case the PTC
immediately switches into TX mode.
As the CTEXT input happens using the command interpreter, one convention for the
<CR>-character has to be followed: A <CR> is represented in the CTEXT string by a '#'.
This is DL6MAA in Mindelheim
The terminal is at the moment not active!
73 de Peter.
The following text has to be entered:
cmd:
CTE
This is DL6MAA in Mindelheim# terminal is at the moment not
active!##73 de Peter <Return>
The command interpreter buffer is 256 characters long. Command with argument should
not contain more than this number of characters, otherwise the Connect text will be
truncated.
47