SCS PTC-IIex, Manual

Page: 178 / 220

13 The BIOS
13.3.9 Time
Default setting: none
Parameter: HH:MM:SS Desired time.
Identical to the
TIme
command in the PACTOR firmware
Arguments are ignored during remote control.
TIme
is used to set or read the internal clock.
If
TIme
is entered without a parameter, the current time is displayed.
When the clock is set, leading zeroes must not be omitted. The colons can be omitted.
Wrong entries cause a wrong programming of the clock component.
cmd:
TI
09:56:05 <Return>
or
cmd:
TI
095605 <Return>
13.3.10 UPDATE
Identical to the
UPDATE
command in the PACTOR firmware.
This command renews the PACTOR firmware in the Flash ROM of the PTC-IIex. It
should only be used together with the corresponding program on the PC.
13.3.11 Version
Displays the version number of the BIOS.
13.4 BIOS SYStest commands
13.4.1 Beep
Produces a short beep tone.
13.4.2 CHKFlash
Check Flash-ROM for valid PACTOR firmware.
13.4.3 CHKRam
Calculate RAM checksum and display in hexadecimal form.
13.4.4 CLr
Erase RAM checksum variable. The is guaranteed to cause a 'loading' at the next switch
on.
164