SCS PTC-IIex, Manual

Page: 27 / 220

3 Installation
3.3.2 Connection to Kenwood transceivers:
Most Kenwood transceivers that use 13 pin DIN plug (ACC2) can be connected this way:
Signal PTC Color Kenwood
GND PIN 2 white PIN 4, 8, 12
PTT PIN 3 yellow PIN 9
AF-OUT PIN 1 violet PIN 11
AF-IN PIN 4 green PIN 3
This cable is available completely assembled.
Refer to Appendix A on page
184 .
Table 3.4: Kenwood 13 pin connection
The TS-50 can only be connected via the microphone jack:
Signal PTC Color Kenwood
GND PIN 2 white PIN 7, 8
PTT PIN 3 yellow PIN 2
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 6
Table 3.5: Kenwood TS-50 connection
The TS-480 has a 6 pin Mini-DIN connector:
Signal PTC Color YAESU
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 5
This cable is available completely assembled.
Refer to Appendix A on page
184 .
Table 3.6: KENWOOD 6 pin Mini-DIN
3.3.3 Connection to Yaesu transceivers:
Some YAESU transceivers use a 5 pin DIN plug (Packet) and can be connected this way:
Signal PTC Color YEASU
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 4
Table 3.7: Yaesu connection
Smaller YAESU’s use a 6 pin Mini-DIN connector, whereby with multiband transceivers
two different connection schemes must be destinguished:
13