SCS PTC-IIex, Manual

Page: 148 / 220

10 Hostmode
10.4.2 D
Disconnects an AX.25 link.
If there is still data to be sent to the partner station, this data is transmitted first, then the
disconnect is carried out.
If the Disconnect command is given twice, one after the other, then the link is broken
immediately (corresponding to
DD
in PACTOR).
10.4.3 F
Default setting: 5,000
Parameter: X 1… 15,000, time in milliseconds
Frack-Timer (T1).
Frack sets the time in which a packet must be acknowledged. If the PTC-IIex sends a
packet, and no acknowledgment is forthcoming within the Frack time, the PTC-IIex then
queries whether the information has arrived.
10.4.4 G
G
(Get) is a special Hostmode command, and is used to get information about the various
Hostmode channels.
This command is only used by the hostmode program. The user cannot enter this
command.
10.4.5 I
Default setting: SCSPTC
Parameter: CAll Station callsign
Sets the station callsign, which can be individually set for each channel., the callsign from
channel 0 being used after a disconnect
10.4.6 JHOST
Default setting: 0
Parameter: 0 Exit hostmode
1 Start hostmode
4 Start CRC hostmode
Switches to the Hostmode or exits.
This command is used by the Hostmode software, in order to switch to Hostmode, the
command has no meaning for the
normal operation in terminal mode.
134