SCS PTC-IIex, Manual

Page: 2 / 220

Disclaimer
SCS
makes no representation of warranties with respect to the contents hereof and
specifically disclaims any implied warranties of merchantability or fitness for any
particular purpose. Further,
SCS
reserves the right to revise this publication, hardware,
and software, and to make changes from time to time in the content thereof without the
obligation of
SCS
to notify any persons of such revisions or changes.
Foreword
The information contained in this handbook has been carefully put together. It is,
however, still possible that errors have crept in. If any errors are found, we ask your
forgiveness, and request you send us a short note pointing them out.
Your
SCS
-Team
Attention, Very Important:
You should connect the power supply plug to the PTC-IIex only when the power supply
is switched off. First connect the plug to the PTC-IIex, and then to the power supply.
The DC plug of the PTC-IIex should never be plugged into its socket with the power
connected. This applies especially when the PTC-IIex and the radio equipment are
connected by means of the AF and the PTT cables, and use the same power supply.
The case of the PTC-IIex is at earth potential, and, in event of a short circuit, very serious
internal damage to the PTC-IIex can occur if this advice is not followed.
Manual rev. G
PACTOR
™
is a registered trademark of
SCS
GmbH & Co. KG, Hanau, GERMANY.
II