SCS P4dragon DR-7800, Installation Manual

Page: 84 / 96

7. Connecting to a Transceiver
79
- For HF and 1k2 Packet-Radio:
Signal P4
dragon
Color YAESU
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 5
This cable is available completely assembled.
Refer to chapter
10 on page 89 .
Table 10: YAESU 6 pin Mini-DIN
- For 9k6 Packet-Radio:
Signal P4
dragon
Color YAESU
GND PIN 2 white PIN 2
PTT PIN 3 yellow PIN 3
AF-OUT PIN 1 violet PIN 1
AF-IN PIN 4 green PIN 4
This cable is available completely assembled.
Refer to chapter
10 on page 89 .
Table 11: YAESU 6 pin Mini-DIN
7.1.4 Connections to KENWOOD
Many KENWOOD radios use a 6 pin DIN socket for remote control. Into some older
transceiver types the serial interface has to be installed previously. Please read the equipment
handbook or consult your dealer.
Signal
P4
dragon
Color KENWOOD
TxD PIN 9 pink PIN 3
RxD PIN 1 violet PIN 2
CTS PIN 5 blue PIN 5
RTS PIN 10 light blue PIN 4
GND PIN 13 orange PIN 1
Table 12: KENWOOD TTL
Newer Kenwood transceiver (since TS-570) have a 9 pin SUB-D connector and operate with
V24 levels for transceiver control. It´s intended for direct connection to a COM port of a PC.
Also these transceivers can easily be controlled by the
P4
dragon
. Just solder a 9 pin connector
to the attached cable as shown in the table below.