SCS LABCOTER 2, Operator'S Manual, Page: 9 / 153

OM-610-1002-1 Operator’s Manual Rev 37
PDS-2010 SECTION 1 SAFETY page
1
SECTION 1 SAFETY
This equipment is designed to be used in the specific manners designated. Key elements in the design
promote operator safety and assure that there will be no damage to the product being coated. The
equipment complies with all applicable sections of NFPA Article 79 of the National Electric code (NEC).
All commercially standard components used in this machine have a minimum of UL and/or CSA ratings.
Components built to
CE standards have been used wherever possible. Any local or regional certifications
required above and beyond the aforementioned are the responsibility of the customer. Efforts are also
continuously made to include
CE compliant components wherever possible.
1.1 GENERAL INFORMATION
The following warning symbols are used through out this manual:
HOT SURFACE
ELECTRICAL SHOCK
FREEZING HAZARD
GENERAL WARNING
This equipment is designed to be used in the specific manners designated. The equipment complies with all
applicable sections of NFPA Article 70 of the National Electric Code (NEC). Any local or regional
certifications required above and beyond the aforementioned statement are the responsibility of the buyer.
WARNING: Safety pays. Improper operation or service of the 2010 can result in serious
injury or death. Read and understand this entire instruction manual before operating or
servicing this equipment.
CAUTION: The 2010 is equipped with a grounding-type power plug, which must be
connected to a grounded outlet to prevent electrical shock.