manualshive.com logo in svg

Scrambler Ducati 1100, Owner'S Manual

Share
Download
Scrambler Ducati 1100 Owner'S Manual Download Page 96

The following table indicates the most suitable level of DTC intervention for the various riding modes as well

as the default settings in the "Riding Mode" that can be selected by the rider.

DTC

RIDING MODE

USE

DEFAULT

1

SPORT

This level is designed for sport use for

medium-expert riders, both on track

and road, with good grip conditions.

System permits sliding sideways.

NO

2

TOURING

This level is designed for road use, with

good grip conditions. System permits

sliding sideways.

It is the default level for the

"ACTIVE" Riding Mode

3

SAFE & STABLE

This level is designed for road use, un‐

der all riding conditions on dry road.

System does not permit sliding side‐

ways.

It is the default level for the

"JOURNEY" and "CITY" Riding

Modes

4

RAIN

This level is designed for road use,

when surface is wet and very slippery.

ENGINE LOW setting recommended.

NO

95

Summary of Contents for 1100























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands