Scrambler Ducati 1100 Owner'S Manual Download Page 89

Page: 89 / 246

Riding Mode

The Riding Mode can be selected from the

instrument panel. Preset riding modes are three:

ACTIVE, JOURNEY and CITY.

The selected and active riding mode is displayed on

the RH side of the display.

Attention

Ducati recommends changing the Riding mode

when the motorcycle is stopped. If the riding mode is

changed while riding, be very careful (it is

recommended to change the Riding mode at a low

speed).
Every Riding Mode contains the following

parameters, set by Ducati or customised by the user

through the relevant pages of the Setting Menu (see

paragraph):

●

a specific level of intervention for the DTC

traction control (1, 2, 3, 4, OFF);

●

a specific engine power that will change throttle

behaviour (HIGH, MEDIUM, LOW).

Fig 57

Summary of Contents for 1100























































































































































































































































Search results

Summary of Contents for 1100

Reviews:

Brands by name

Popular brands

Scrambler Ducati 1100, Owner'S Manual

Search results

Summary of Contents for 1100

Reviews:

Brands by name

Popular brands