manualshive.com logo in svg

Scrambler Ducati 1100, Owner'S Manual

Share
Download
Scrambler Ducati 1100 Owner'S Manual Download Page 224

Performance data

Maximum speed in any gear should be reached only

after a correct running-in period with the motorcycle

properly serviced at the recommended intervals.

Important

Failure to follow these instructions releases

Ducati Motor Holding S.p.A. from any liability

whatsoever for any engine damage or shorter engine

life.

Spark plugs

Make: NGK

Type: DCPR8E

Fuel system

Indirect electronic injection.

Throttle body type: Ride by Wire (RbW)

Diameter of throttle body: 55 mm (2.16 in)

Injectors per cylinder: 1

Firing points per injector: 8

Fuel supply: 95-98 RON.

Attention

The motorcycle is only compatible with fuel

having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is

forbidden. Using it could result in severe damage of

the engine and motorcycle components. Using fuel

with ethanol content over 10% will make the

warranty null and void.

Brakes

Separate-action anti-lock braking system operated

by hall-type sensors mounted to each wheel with

phonic wheel detection: ABS can be disabled.
FRONT

Front brake discs

No. 2 semi-floating drilled discs.

Braking material: steel.

Carrier material: stainless steel, black colour.

223

Summary of Contents for 1100























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands