Scrambler Ducati 1100 Owner'S Manual Download Page 119

Page: 119 / 246

When entering the function, the currently set DTC

intervention level starts flashing (Fig 83). Use

buttons (1) and (2) to cyclically select the values "-"

(DTC OFF), "1", "2", "3", "4" and "EXIT" with flashing

frame.
Once the new level for the DTC parameter is

selected, press button (4).
The instrument panel displays the new set level and

"EXIT" with flashing frame (Fig 84). Now press

button (4) to go back to previous display mode.

Note

By setting "– " (Off), the DTC will be disabled.

If the DTC function is disabled and hence set to level
"-" (DTC OFF) the DTC

warning light (warning

light 12, see “Instrument panel”) on the instrument

panel turns on.

Fig 83

Fig 84

118

Summary of Contents for 1100























































































































































































































































Search results

Summary of Contents for 1100

Reviews:

Brands by name

Popular brands

Scrambler Ducati 1100, Owner'S Manual

Search results

Summary of Contents for 1100

Reviews:

Brands by name

Popular brands