Scrambler Ducati 1100 Owner'S Manual Download Page 91

Page: 91 / 246

Upon change of riding mode, the instrument panel:

●

if vehicle speed is

≤

5 Km/h (3 mph) and throttle

control is "closed", the instrument panel will

confirm the selected riding mode, the name of

Riding Mode flashes for 3 seconds and

instrument panel goes back to “standard page”

displaying.

●

if vehicle speed

≤

5 Km/h (3 mph) and throttle

control is "open", the instrument panel will

display “CLOSE” and “GAS” (A, Fig 59). Only

when throttle control is "closed" does the

instrument panel confirm the selected riding

mode and go back to standard page displaying.

●

if vehicle speed is > 5 Km/h (3 mph) and throttle

control is "closed” and brakes are released, the

instrument panel will confirm the selected riding

mode, the name of Riding Mode flashes for 3

seconds and instrument panel goes back to

standard page displaying.

●

if vehicle speed > 5 Km/h (3 mph) and throttle

control is "open", the instrument panel will

display “CLOSE” and “GAS” (A, Fig 59). Only

when throttle control is "closed" does the

instrument panel confirm the selected riding

mode and go back to standard page displaying.

●

if vehicle speed is > 5 Km/h (3 mph) and throttle

control is "closed” but brakes are in use, the

instrument panel will display “DON’T” and

“BRK” (B, Fig 59). Only when brakes are released

does the instrument panel confirm the selected

riding mode and go back to standard page

displaying.

●

if vehicle speed is > 5 Km/h (3 mph) and throttle

control is "open” and brakes are in use, the

Fig 59

Summary of Contents for 1100























































































































































































































































Search results

Summary of Contents for 1100

Reviews:

Brands by name

Popular brands

Scrambler Ducati 1100, Owner'S Manual

Search results

Summary of Contents for 1100

Reviews:

Brands by name

Popular brands