Boly Media
SG550 series
4
Advanced
Operation
shown in the Fig. 14(a) and 14(1).
b)
Press the RIGHT key, the value of the parameter will be changed to “Off” as
shown in the Fig. 14(b) and 14(2). The value “Off” is highlighted.
c)
Press OK key for saving setting or MENU key for canceling operation and
exiting. After pressing OK key the selected value will be no more highlighted,
shown in the Fig. 14(c) and 14(3).
(a)
(1)
(b)
(2)
(c)
(3)
Figure 14: Setting time stamp
4.1.11
Setting Timer
This parameter is only valid in the LIVE mode and defines a certain time lapse in
a day when the camera can be triggered. In the rest of the time the device is shut off.
The effective value of the hour ranges from 0 to 23 while the minute ranges from 0 to
59. The setting of this parameter is similar to that of date and time.
Please note that the start and stop time can only be effective when the timer is set
to the value of “On”. Provided that the device should work from eight clock a.m. to
five clock p.m., in MENU state detailed operations are as following:
a)
Press the UP or DOWN key till the parameter “Timer Switch” appears as
shown in the Fig. 15(a) and 15(1).
b)
Press the RIGHT key at first. Then the value of this parameter will be
changed to “On”, shown in the Fig. 15(b) and 15(2).
c)
Press the OK key to enter into setting start time. Then the hour of start time
can be set as shown in the Fig. 15(c) and 14(3).
d)
Press the UP or DOWN key till the hour of start time changes to 8 as shown
in the Fig. 15(d) and 15(4).
e)
Press the RIGHT key to set minute of start time as shown in the Fig. 15(e)
and 15(5).
Page 20
Boly Media Communications
