manualshive.com logo in svg

SCIFIT STEP ONE, Service Manual

Share
Download
SCIFIT STEP ONE Service Manual Download Page 8

SPECIFICATIONS

MEChANICAL REMOVAL/REPLACEMENT

5

            SCIFIT        Scientific Solutions For Fitness        SCIFIT        Scientific Solutions For Fitness        SCIFIT

Tools Required:

 

Step 1: 

Place one hand on the seat cushion back support 

and  the ot her on t he f ront of  t he s eat bot tom  pad.                                                                                                                                             
                                                                                               

Step 2:

 Place your foot on, then push down and hold 

the “ Foot  Assist P edal”  located  in f ront of  t he s eat.                                                                                                                                            
                                                                                                 

Step 3:

 Slide the seat assembly backwards until 

it i s  completely  off of  t he m achine  seat t rack.                                                                                                                                           
                                                                                      

TO REMOUNT:

 Put the seat assembly onto the track, 

then press down on the “Foot Assist Pedal” to position 
the seat assembly back onto the seat track.

REMOVE

PLACE 

FOOT 

hERE

* 3/16 T-Handle Allen Hex * Small Deadblow Hammer * Narrow Edge Plastic Punch 

Use a 3/16 allen hex to remove the dog 
point set screw (#25903)

Step 1:

 

SPECIFICATIONS

LEFT hAnDLEBAr rEmovAL

FIXED/SWIvEL

Summary of Contents for STEP ONE









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands