manualshive.com logo in svg

SCIFIT STEP ONE, Service Manual

Share
Download
SCIFIT STEP ONE Service Manual Download Page 4

CAUTION

1

The purpose of safety symbols is to attract your attention to possible dangers. The safety or attention symbols 
and their explanations deserve your careful attention and understanding. The warnings do not, by themselves, 
eliminate any danger. The instructions or warnings they give are not substitutes for proper accident prevention 
measures.

Look for these symbols to point out safety precautions or important information. 

WARNINg

SAFETy INFORMATION

Read all instructions before doing service on a SCIFIT exercise machine. Save these instructions for future 
reference.

Close supervision is necessary when doing service on the exercise machine by or near children or individuals 
with disabilities. Keep children away from the machine when being serviced.

It is recommended to place an “OUT OF ORDER” sign on the machine when it is being serviced.

Do not lift or remove a part from the machine when an assistant is needed.

            SCIFIT        Scientific Solutions For Fitness        SCIFIT        Scientific Solutions For Fitness        SCIFIT

ATTENTION

Summary of Contents for STEP ONE









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands