manualshive.com logo in svg

SCIFIT STEP ONE, Service Manual

Share
Download
SCIFIT STEP ONE Service Manual Download Page 69

SPECIFICATIONS

ELECTRICAL PARTS REMOVAL/REPLACEMENT

66

            SCIFIT        Scientific Solutions For Fitness        SCIFIT        Scientific Solutions For Fitness        SCIFIT

Use a phillips screwdriver to remove 
the four M5 x 12mm screws (#91218), 
securing the console bracket (#A5044) to 
the console, then remove the bracket.

Step 3:

 

Mid-Cable

Magnet Cable

Frame channel

The mid-step counter cable (#A5409) 
is hidden within a frame channel on the 
upper part of the main frame behind the 
brake, carefully pull out the cable to 
access the housing connection between the     
mid-cable and the magnet cable (#A5410).

Step 2:

 

SPECIFICATIONS

conSoLE AnD conSoLE BrAckET rEpLAcEmEnT

Repeat steps 1 thru 3, but in reverse. 

SPECIFICATIONS

mID-cABLE rEmovAL

Remove the console and lower/upper covers according to the “Lower/Upper Cover Removal” process.

Step 1:

 

Summary of Contents for STEP ONE









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands