![SCIFIT STEP ONE Service Manual Download Page 57](http://html.mh-extra.com/html/scifit/step-one/step-one_service-manual_1217587057.webp)
SPECIFICATIONS
MEChANICAL PARTS REMOVAL/REPLACEMENT
54
SCIFIT Scientific Solutions For Fitness SCIFIT Scientific Solutions For Fitness SCIFIT
Place a small drop of Loctite 271 on the
threads of the four flathead screws and
loosely screw
them onto the pulley.
Loc
tite
271
Step 2:
Step 3:
Use a 3mm Allen hex to remove the
four M5 x 18mm flat head socket screws
(#0141378) .
3mm Allen
hex
Place the drive belt around the brake pulley
and over the idler pulley, then carefully
walk the drive belt onto large pulley’s
grooves t urning i n a c lockwise direction.
Note: Verify that belt is centered on the
pulley.
Step 4:
Idler pulley
Brake pulley
ATTENTION
Pinching points may occur when replacing
the belt, please use caution.
Summary of Contents for STEP ONE
Page 103: ...This page purposely left blank ...