Universal Remote Control — Standard Button Functionality
Your universal remote control is simple to program, easy to use, and can operate
up to four devices, including a digital receiver, television, VCR or DVD, audio cassette
deck, CD, converters, amplifier or a second TV or second VCR.
Before you can use your remote control, it must be programmed (set up) to operate the
above devices. Please refer to the manufacturer’s user’s guide for complete instructions.
Your remote control is designed to operate all the features and functions of your
digital receiver.
NOTE:
Your remote control may look different. All functions and buttons will operate
in the same manner.
Use CH + or CH – to
select the next higher
or lower channel
View (Pay-Per-View)
menu
Use these buttons
to control your VCR,
DVD, or DVR
Select DVD/VCR
EXIT out of cable receiver’s
menu and IPG
SETUP to all devices
Select digital CABLE receiver
Use keypad (0-9) to
directly select channels
Select AUX device
Use A, B, C or SETTINGS to
access additional cable features
CURSOR buttons help you
navigate within the Interactive
Program Guide (IPG)
Use GUIDE to
display the IPG
Use SELECT to choose
options and to tune to
programs from the IPG
Use VOL + or VOL –
to adjust the volume
Use INPUT to control
the input select feature
on most TVs
Press MENU once to
display the available
interactive services
Turn POWER ON/OFF
to all devices
Select TV power
Display current channel
and program INFO
PAGE + or – through menu
or program screens faster
Press LAST to recall last CH
Use FAV to view
favorite CHs
Press MUTE to
turn sound ON/OFF
Press ENTER once
after entering channel
numbers on some TVs
DVR LIST to view
recorded programs
Picture-In-Picture
(PIP) controls
DVR instant replay
(last 8 seconds)
LIVE to jump from
pause to live program
13
CBS90064_SciAtl-Pgs 13
5/29/09 2:31:17 PM
