Hydrim L110w Service Guide 95-109977-1
…
36
Safety Switch & Probe
Remove filter screen from inside
chamber and unclip Safety
Switch Probe from Heating
Element.
Behind the cover below the front
door remove the nut that holds
the probe to the chamber. Safety
Switch is located behind plate.
Safety Switch Part # 22815.03
Chamber Temperature Sensor
Remove mounting nut from
sensor located underneath the
filter inside the chamber. Behind
the cover below the front door
remove the sensor from the
chamber and unplug the red
wiring.
Chamber Temp.
Sensor Part # 22816.12
Door Latch
Remove top cover. Disconnect Door Latch in front of unit and
replace.
Door Latch Part # 23066.00
Touch Screen
Remove the screw above the touch screen and open door. Disconnect I/O Board
and Logic board from Touchscreen, replace the touchscreen and re-connect the
boards in reverse order. Close the door and re-insert the screw above the
touchscreen.
Touch Screen Part # 01-109785S
Probe mounting nut
Safety Switch location
Safety Switch
Chamber Temperature Sensor
Chamber Temperature Sensor
