Schwinn 510T Service Manual Download Page 3

Page: 3 / 147

SAFETY WARNING LABELS AND SERIAL NUMBER

Serial Number

Product Specifi cation

CAUTION

Risk of Injury to Persons - To Avoid injury, use

extreme caution when stepping onto or off of

a moving belt. Read instruction manual before

using.

WARNING!

• Injury or death is possible if caution is not

used while using this machine.

• Keep children and pets away.

• Read and follow all warnings on this

machine.

• Refer to the Owner’s Manual for additional

warnings and safety information.

• The heart rate displayed is an approximation

and should be used for reference only.

• Not intended for use by anyone under 14 years

of age.

• The maximum user weight for this machine is

275 lbs (125 kg).

• This machine is for home use only.

• Consult a physician prior to using any exercise

equipment.

• REMOVE SAFETY KEY WHEN NOT IN USE,

AND STORE OUT OF REACH OF CHILDREN.

(

The label on the machine is available in English and

French Canadian only

WARNING!

- Moving parts can crush and cut.

- Keep guards in place.

- Lock out power before servicing.

WARNING!

HAZARDOUS VOLTAGE.

- Contact may cause electrical shock or burn.

- Turn off and lock out power before servicing.

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.X

X.XX

X.XXX

ANGULAR

SIZE

This document is the property of Nautilus, Inc. It may not be reproduced in whole or part, provided to third parties, or used for any purposes other than the performance of work for Nautilus, Inc. without written authorization. All rights are reserved, including copyrights.

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

- -

APPROVALS

- -

WARRANTY ITEM:

D.LOVELY

08 /13 / 2009

D.LOVELY

002-2353

TC PULL IN WARNING

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

DRAWING RELEASE

CHANGED SIZE

8/17/09

12745

12247

DLOVELY

120mm

30.5mm

-Moving parts can crush and
cut.
-Keep guards in place.
-Lock out power before
servicing.

REVISIONS

ECO

REVISION

REV DESCRIPTION

APPROVED

DATE

TITLE.

PART NO.

REV.

SHEET 1 OF 1

SCALE: 1:1

DO NOT SCALE DRAWING

1. ALL ITEMS MUST BE RoHS COMPLIANT

2. ALL DIMENSIONS APPLY BEFORE PLATING OR COATING.

3. REMOVE ALL BURRS, BREAK SHARP EDGES 0.5 MM MAX.

4. ALL MACHINES SURFACES Ra 3.2 uM.

5. ALL APPLICABLE NAUTILUS STANDARDS AND

SPECIFICATIONS APPLY.

6. ALL DIMENSIONS ARE IN MILLIMETERS

7. ALL DUAL DIMENSIONS ARE IN INCH

UNLESS OTHERWISE SPECIFIED:

METRIC

THIRD ANGLE

PROJECTION

INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M - 1994

2.5

1.5

0.75

0.25

1°

X.X

X.XX

X.XXX

ANGULAR

SIZE

TOLERANCES.

DRAWN

DESIGNED

DATE

METRIC_C_REV G

NAUTILUS, INC.

16400 SE NAUTILUS DRIVE, VANCOUVER, WA 98683

LIFECYCLE

- -

APPROVALS

- -

WARRANTY ITEM:

D.LOVELY

08 /17 / 2009

D.LOVELY

002-2354

TC SHOCK WARNING

MATERIAL.

COLOR.

DIE LINE

PMS 152

PMS 109

BLACK

WHITE

Labels must be created from an agency approved tamper proof labeling system

such as "UL Recognized component marking and labeling system (example: UL PGGU2) or equivalent.

Label and adhesive must be rated for surface it is applied to (painted metal or ABS plastic),

Label and adhesive must be rated for 60 degrees C minimum. Labels must meet UL 1647 Permanence of Marking Test.

72mm

30.5mm

DRAWING RELEASE

CHANGED SIZE

8/17/09

12745

12247

DLOVELY

WARNING!

Keep young

children away

from this

machine at all

times. Contact

with the moving

surface may

result in severe

friction burns.

(This label is only

available on the

510T machine

in English and

Chinese.)

(These labels are in English and

French Canadian on the 810 machine,

and English, French Canadian and

Chinese on the 510T machine.)

Summary of Contents for 510T




















































































































































Search results

Summary of Contents for 510T

Reviews:

Related manuals for 510T

Brands by name

Popular brands

Schwinn 510T, Service Manual

Search results

Summary of Contents for 510T

Reviews:

Related manuals for 510T

Brands by name

Popular brands