37
15. Make sure there is sufficient space to tilt the machine back upright and
that the area is clear.
This step requires two people. Be sure there is adequate
clearance for the raised deck. Some components of the
equipment can be heavy or awkward. Enlist the service of a
second person when you do maintenance steps involving
these components. Do not try to do heavy or awkward steps
on your own.
16. Re-install and connect all remaining parts that were removed in
reverse order.
17. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
