73
8. Using a #2 Phillips screwdriver remove the 2 indicated screws
from the Motor Cover and remove it.
9. Connect the new I/O Cable to the old I/O Cable using a piece of
wire or string. Be sure that the ends of the Cables that you are con-
necting do not match.
Note:
Do not crimp cables.
10. Gently pull the old I/O Cable toward the MCB, routing the new
I/O Cable through the Right Upright to the MCB.
Note:
Be sure the cable does not crimp when being routed.
11. Disconnect the old I/O Cable, and dispose of it appropriately.
12. Connect the new I/O Cable to the MCB, and the Grounding Cable to
the Frame Assembly.
13. Re-install all remaining parts that were removed in reverse order.
14. Make sure there is suffi cient space to lower the walking deck.
Keep a minimum clearance behind the machine of 79” (2 m)
and 24” (0.6 m) on each side. This is the recommended safe
distance for access, movement and emergency dismounts
from the machine.
15. Make sure there is no object on or around the treadmill to spill or
cause blockage from the fully unfolded position.
16. Slightly push the walking deck forward toward the console. With your
foot lightly push the top part of the hydraulic lift forward until the locking
tube releases and you can pull the walking deck away from the console.
Hold up the rear of the walking deck, and move to the side of the machine.
Keep clear of the movement path of the walking deck.
