z
z
z
En gine idle re lease - Push
z
z
z
Close twistgrip to the CUT OFF po si tion.
z
z
z
Use starter to con tinue mo tor ing en gine for at least ten sec onds
or un til TOT is no more than 150°C. (N
1
may ex ceed nor mal ig -
nite speed of 12 to 15%.)
z
Start/ignition button - release at 58 to
60% N
1
RELEASE
z
Engine oil pressure - 50 to 130 psi
CHECK
z
All caution and warning indicators out
CHECK
NOTE: Trans mis sion oil pres sure warn ing (XMSN OIL PRESS)
in di ca tor will go out within 30 sec onds from en gine light-off. GEN
OUT in di ca tor will re main on un til the gen er a tor switch is moved
to the GEN po si tion.
z
Engine idle speed - 59 to 65% N
1
CHECK
z
All other instruments:
CHECK
CAU TION
Mal func tions are in di cated if ro tor and en gine RPM in di ca tor
nee dles are not su per im posed. Shut down en gine if this
con di tion ex ists.
z
N
2
engine and rotor RPM indicators for
coincidental reading
CHECK
NOTE: In or der to al low for man u fac tur ing tol er ances,
“su per im posed” means within 1/2 a nee dle width. The rel a tive
po si tions of the su per im posed nee dles should re main con stant
dur ing pow ered flight.
Normal Procedures
Schweizer RSG, LLC.
Model 269D Helicopter
Pilot's Flight Manual
4-19
Reissued:
16
Jan 2019
FAA Approved
Book 3.indd 107
8/4/19 1:25 PM
