18
CRAFT-STICK | Version 1.12
Disposal, reusing used machines
11 Disposal, reusing used ma-
chines
In your own interest and to protect the environment make
sure that all machine components are exclusively dis-
posed of in as intended and permitted.
11.1Decommissioning
Disused machines must be decommissioned immedi-
ately to prevent misuse at a later point and putting the
environment or persons at risk.
Step 1: Remove all environmentally hazardous process-
ing materials from the used machine.
Step 2: If necessary, disassemble the machine into as-
semblies and components that are easy to han-
dle and suitable for recycling.
Step 3: The machine components and processing mate-
rials must be disposed of using the intended dis-
posal methods.
11.2Disposal of electrical equipment
Electrical equipment contains a variety of recyclable ma-
terials and environmentally harmful components.
These components must be disposed of separately and
properly. In case of doubt, contact the municipal waste
disposal department.
If necessary, a specialist waste disposal company
should be called upon to help with processing.
11.3Disposal via communal recycling
points
Disposal of used electrical and electronic equipment (to
be used in the countries of the European Union and
other European countries with a separate collection sy-
stem for this equipment).
The symbol on the product or its packaging in-
dicates that this product is not to be treated as
normal household waste, but must be returned
to a collection point for the recycling of electri-
cal and electronic equipment. By contributing
to the correct disposal of this product, you protect the en-
vironment and the health of your fellow human beings.
Environment and health are endangered by incorrect
disposal. Material recycling helps to reduce the
consumption of raw materials. For more information
about recycling this product, contact your local commu-
nity, municipal waste management company or the store
where you purchased the product.
12 Spare parts
12.1Spare parts orders
Spare parts are available from authorised retailers or di-
rectly from the manufacturer.
Contact details:
Fax: 0049 (0) 951 96555-119
email: [email protected]
Always quote the following key data with your spare
parts orders:
- Device type
- Article number
- Position number
- Year of manufacture
- Quantity
- Desired shipping type (post, freight, sea, air, express)
- Shipping address
Spare parts orders without the aforementioned data can-
not be taken into account. The supplier shall determine
the shipping type if no relevant data was provided.Infor-
mation about the device type, article number and year of
manufacture can be found on the type plate. The type
plate is mounted on the device..
Example
The fan for the electrode inverter CRAFT-STICK 141
must be ordered. The fan is identified in the spare parts
drawing 1 with the number 4.
By ordering spare parts, send a copy of the spare parts
drawing (1) with the marked part (Fan) and marked posi-
ton number (4) to the dealer or spare parts department
and provide the following information:
Type of device:
Electrode Inverter CRAFT-STICK 141
Item number:
1073141
Position number:
4
Drawing number:
1
DANGER!
Risk of injury caused by the use of
incorrect spare parts!
The use of incorrect or faulty spare parts may cause
risks for operating staff and damage as well as mal-
functions.
- Exclusively genuine spare parts made by the manu-
facturer or spare parts authorised by the manufac-
turer shall be used.
- Always contact the manufacturer if you are unsure.
NOTE!
The manufacturer warranty shall be rendered void in
the event of a use of unauthorised spare parts.
Summary of Contents for 1073141
Page 25: ...CRAFT STICK Version 1 12 25 Notes 15 Notes ...
Page 26: ...www schweißkraft de ...
