Schweißkraft 1073141, Operating Instructions Manual

Page: 4 / 26

4 CRAFT-STICK | Version 1.12
Safety
Tips and recommendation
It is necessary to observe the safety notes written in
these operating instructions in order to reduce the risk of
personal injuries and damages to property.
2.2 Personal protective equipment
The personal protective equipment serves to protect per-
sons against impairments of safety and health while
working. The staff member has to wear personal protec-
tive equipment while performing different tasks on and
with the machine which are indicated in the individual
paragraphs of these instructions.
The personal protective equipment is explained in the
following paragraph:
2.3 General safety regulations
- Before commissioning, check the device for exter-
nally visible damage and defects.
- Repair defects and damage immediately.
- Work on the electrical equipment may only be car-
ried out by a qualified electrician.
- Do not use the device in a damp, wet environment,
rain, etc.
- Only use original spare parts and accessories.
- Disconnect the mains plug before carrying out repair
and maintenance work and after use.
- Make sure the ON/OFF switch is off when plugging
the plug into the power outlet to prevent accidental
start-up.
2.4 Safety labels on device
Several warning signs and safety labels are attached to
the device, which must be observed and followed. The
safety labels attached to the device must not be remo-
ved. Damaged or missing safety labels can lead to incor-
rect actions, personal injury and damage to property.
They must be replaced immediately. If the safety mar-
kings are not visible and understandable at first glance,
the device must be taken out of operation until new
safety labels have been applied.
CAUTION!
This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead
to minor or light injuries if they are not avoided.
ATTENTION!
This combination of symbol and signal words indi-
cates a possibly dangerous situation which may lead
to property and environmental damages if they are
not avoided.
NOTE!
This combination of symbol and signal words indica-
tes a possibly dangerous situation which may lead to
property and environmental damages if they are not
avoided.
Tips and recommendation
This symbol highlights useful tips and recommenda-
tion as well as information for all efficient and trouble-
free operation.
Welders face shield or Helmet with
welder face shield
The welding shield, which is worn on the head and in
front of the face or attached to a suitable protective
helmet, protects eyes and face, equipped with
suitable filters.
Protective gloves with pulse pro-
tection
The protective gloves with pulse protection prevent
the hands from sharp-edged components, as well as
from friction, abrasions, light burns or deeper injuries.
Safety boots
The safety boots protect the feet from crushing, fal-
ling parts and slipping on slippery surfaces.
Protective clothes
Protective clothes are made of a tightly fitted fabric
without the protruding parts of low tear strength.
Protective apron
The protective apron mainly protects the front of the
body from sparks or radiation during welding.