CRAFT-STICK | Version 1.12
5
Intended Use
Fig. 1: Safety labels
3
Intended Use
The device is used exclusively for arc welding according
to MMA and TIG (only models 161P and 201P ).
The electrode inverters are built and tested according to
EN 60974-10 in EMC class A.
Intended use also includes compliance with all informa-
tion in these instructions. Any use exceeding the inten-
ded use or any other use is considered misuse.
Stürmer Maschinen GmbH accepts no liability for design
and technical modifications to the electrode inverter.
Claims of any kind for damage due to improper use are
excluded.
4
Technical Data
4.1 Type plate
Fig. 2: Type plate CRAFT-STICK 141 and CRAFT-STICK 201P
WARNING!
This Class A welding device is not intended for use in
residential installations where the power supply is
provided by a low-voltage public power supply
system. It may be difficult to ensure electromagnetic
compatibility in these areas due to both conducted
and radiated interference.
WARNUNG!
Danger in case of misuse!
Misuse of the device can lead to dangerous situati-
ons.
- Only operate the device in the power range speci-
fied in the technical data.
- Never bypass or disable the safety devices.
- Only operate the device in a technically perfect con-
dition.
Summary of Contents for 1073141
Page 25: ...CRAFT STICK Version 1 12 25 Notes 15 Notes ...
Page 26: ...www schweißkraft de ...
