background image

 

29 

WARRANTY 

PLEASE NOTE:  

As your Schwan appliance is always full of cold water,  

we recommend a drained drip tray should be used in those applications  

where any leakage could cause property damage. 

 

WARRANTY PERIOD: 

For residential installations, the Warranty period is for two years. For commercial installa-

tions, (maximum 8 staff), the Warranty period is for one year. 

Please keep all Purchase and Plumber’s installation Invoices as verification of Warranty commencement

 

date.

  

The Warranty will be for 24 months (residential) or 12 months (commercial) from date of installation.  If you are 

unable to provide proof of installation date, then the Warranty will be for 25 months (residential) or 13 months 

(commercial) from date of purchase. 

WARRANTY COVERAGE: 

Schwan provides a comprehensive parts and labour Repair or Replacement Warranty.  

Repair or Replacement will be at Schwan’s discretion, and must be carried out by an authorised Schwan Service 

Agent.  The Warranty covers defects in materials and manufacturing only, and repairs will normally be carried out in 

your home or commercial premise free of charge during the warranty period. 

However, in areas more than 25 km from an authorised Schwan Service Agent, you may be charged for some travel 

and associated costs. 

Alternatively, Schwan may require you to return your unit to Schwan so that Schwan can provide you with a replace-

ment unit free of charge.  In this case, Schwan will pay the necessary freight charges, and you will need to take re-

sponsibility for the removal of the faulty unit, and installation of the replacement unit. 

Any product replaced or repaired under this Warranty will be covered by the remaining portion of the original 

product’s Warranty period, or 6 months, whichever is the greater. 

WARRANTY EXCLUSIONS

This Warranty does not cover damage, deterioration, or malfunction resulting from ac-

cident, misuse, neglect, abuse, unauthorised modification, fire, water, lightning or other acts of nature, incorrect in-

stallation, poor water quality, repair or attempted repair by anyone other than an authorised Schwan Service Agent, 

or external causes such as electric power fluctuation or failure. 

Filter cartridges are not covered by this Warranty, as these are a consumable item, and water conditions and usage 

vary, which can affect the effective life of the filter. 

LEGISLATION: 

Nothing in this Warranty overrides Schwan’s responsibilities under the Consumer Guarantees Act 

for residential installations. The owner agrees that the Consumer Guarantees Act does not apply to commercial in-

stallations.  

IN THE EVENT OF A MALFUNCTION, PLEASE CONTACT MERQUIP ON 

0800 636 0 636

 OR 

EMAIL 

[email protected]

 

MODEL:  SC80 

SERIAL NUMBER:

 

Summary of Contents for SC80

































Reviews: