21
The back of the unit should look like this.
Check all fittings are in correctly and
position chiller in cabinet.
NOTE: top of internal ice bank is not sealed
take care when moving unit and dry up any
spilled water.
The tubes coming from the tap attach to the
soda out (white) and water out (blue) trim to
length.
Max distance from tap to chiller is 700mm.
Measure distance and trim tubes 100mm
longer
Attach CO2 regulator to CO2 bottle and
screw up by hand until sealed.
Note: if gas starts coming out of regulator
once bottle is sealed turn knob anticlockwise
until flow stops.
Fit 6mm black tube to fitting on CO2 regulator
12
13
14
Summary of Contents for SC80
