Schwamborn 795137, Operating Instructions Manual, Page: 9 / 28

9
Exchanging the smoothing trowels and smooth-
ing plates
Caution!
5. Lift up the machine and secure it against tipping
over or falling down
6. In order to avoid injuries, wear protective cloth-
ing, safety helmet, safety gloves, safety goggles
and safety shoes
7. Loosen the fixing screws and exchange the
accessories
8. Tighten them after fitting the accessories
Machine check and maintenance plan after:
Tasks daily See engine
manufacturer’s
specifications
Cleaning X
Tighten screw X
Smoothing tools X
Check engine oil X
Check gearbox oil X
Lubricate moving
parts X
Belt drive X
Check air filter X See engine
manufacturer’s
specifications
Check oil filter X See engine
manufacturer’s
specifications
Fuel filter See engine
manufacturer’s
specifications
Engine oil X See engine
manufacturer’s
specifications
Engine maintenance See engine
manufacturer’s
specifications
6. Fault-finding and rectification
1. The machine does not start
Cause:
•
No fuel
•
Wrong fuel
•
Faulty spark plug
•
Faulty dead man’s switch
•
Petrol filter blocked
2. Machine runs roughly
Cause:
•
Dirty petrol filter
•
Dirty air filter
•
Wrong fuel mixture
•
Adjust spark plugs
•
Faulty spark plugs cable
•
Faulty working tools
7. Technical Data
BEG 180
Type Honda GX 670
Drive motor kW 17,6
Fuel Regular petrol
Petrol tank l 10
Engine oil Type 15 W40
Engine oil l 1,9
Water tank l 20
Working width mm 2 x 900
Rotation speed rpm 0 to 125
Gearbox, smoothing
unit Maintenance-free,
forced cooling
Clutch centrifugal
Weight kg 360
Dimensions l x w x h mm 1900x1000x1100
EC Declaration of Conformity
In the sense of the EC machine guideline 98/37/EC
Manufacturer:
Schwamborn Gerätebau GmbH
Robert-Bosch Str. 8
D-73117 Wangen bei Göppingen
Germany
We hereby declare that the concrete smoothing
machine
BEG 180
Serial number
.........................................
has been manufactured in accordance with the
following Council directives:
Low-Voltage Directive 73/ 23/ EEC
DIN EN 292-1 // DIN EN 292-2
DIN EN 294
EMC Directive 89/336/EC
EN 292-1 / EN 292-2 / EN 294
EN 60204-1
EN- 1050
Eckart Schwamborn,
General Manager