Schwamborn 719100, Translation Of The Original Operating Manual

Page: 16 / 56

1 Important information
EN Floor grinding machine DSM 450
16
1 Important information
The machine may be used only with the accessories
supplied by the manufacturer for stripping, wet grind­
ing, and dry grinding of even, level floor surfaces
such as:
— Cement
— Sreeds
— Synthetic resin screeds / asphalt
— Natural stone floors
— Residual adhesive or filling compound
— Floor remnants (e. g. foam backing)
Any other use of the machine can lead to dangerous
situations and is prohibited!
To ensure proper use of the machine, follow the
instructions in the operating manual, paying particular
attention to any warnings and instructions relating to
operation and maintenance!
Before using the machine, the
operating personnel must carefully
read and understand this operating
manual!
Keep this operating manual close at
hand for easy reference!
Read and observe documents and
operating manuals provided by
suppliers!
If the machine is on loan to other parties, the
operating manual needs to be provided with the
machine and its importance must be made clear!
1.1 Copyright, liability and warranty

Schwamborn Gerätebau GmbH
All rights, including those pertaining to translation, lie
with Schwamborn Gerätebau GmbH.
No part of this documentation may be reproduced,
used or distributed in any form without the written
permission of Schwamborn Gerätebau GmbH.
Liability or warranty in accordance with legal require­
ments is excluded if:
— The instructions in the operating manual
have not been observed.
— The machine or its attachments were im­
properly operated.
— The maintenance was carried out inade­
quately or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used,
has been altered or was removed.
— The specified power supply ratings and
surrounding conditions have not been ob­
served.
— Unsuitable tools have been used.
— An unsuitable dust extraction has been used.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer’s permission. Any
such actions will void the warranty.
1.2 Symbols used
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
relevant symbols.
Important text
Precondition for or result of an action
7. Instruction steps, the sequence of which must
be followed exactly.
— List or unstructured sequence
!
Reference to other text passages
Additional information
2 Safety
This chapter contains a summary of the most impor­
tant information on safety when handling the
machine.
2.1 Accident prevention and safety
The following instructions comply with legislation, di­
rectives and publications such as:
— EC Machinery Directive
— EC Product Liability Directive
— Law on technical materials
— Law on equipment safety
— Law on product liability
This operating manual is intended for operators and
tool setters, as well as for the personnel that service,
maintain and repair the machine. Together with all
the technical documentation, it is intended to help
— avoid hazardous situations
— use as intended
— avoid downtime and repair costs
Warning Prohibition
Direction