manualshive.com logo in svg

Schwaiger DSR 5600 TS, User Manual

Share
Download
Schwaiger DSR 5600 TS User Manual Download Page 29

29

11. Use 

VOL 

◀

 

▶

 to activate 

(On)

 or deactivate 

(Off)

 Timer recording.

12. Complete your settings by pressing 

EXIT

 and then 

OK

.

Use the 

EXIT

 button to hide the menus. The digital receiver will switch on at the set time. The display 

will then show 

“rEC”

. If a timer is activated, the receiver cannot be operated further. You can however 

call up the 

Timer recording

 menu and deactivate the timer.

NOTE:

The local time of the receiver must be set correctly, and your video recorder programmed accordingly.

Information

In the 

Main menu

, move the cursor using

the buttons 

CH

 

VW

 onto the line 

Information

and press the OK button.
The reception properties of the active programme
will now be shown. You can also activate the menu
in normal TV or radio operation via the 

yellow

button on the remote control.

The top section of the menu shows the programme parameter and the activated programmes.
The bottom section of the menu shows the signal properties

Livello:

 

The further to the right the bar is, the better the signal received.

C/N:

  

The further to the right the bar is and the higher the dB value, the better the signal quality 
is. 

NOTE:

The signal strength depends not only on your receiver system, but also on the currently active channel. 
Remember this when you check the direction of your antenna using the signal strength display.

Use 

VOL 

◀

 

▶

 or the yellow button to superimpose two further windows giving programme and 

software-/hardware information. You can change the programme using 

CH

 

VW

 

and 

SWAP

.

Leave the menu using 

EXIT

.

Video text

Switch on the programme from which you want to receive video text. Then press the blue button to 
switch on the video text. The start page is page 100.

Enter the three-digit page number using the buttons 

0-9

. Your entry is shown in the top left-hand corner 

of the screen. After you have entered the complete page number, the device will search for the page 
you want. Since video text pages are transmitted one after the other, it may take a few seconds to fi nd 
your page.

Use the 

CH

 

VW

 

buttons to scroll backwards or forwards.

Press the 

blue

 button again to switch to Mix operation. This shows the video text page transparently, 

so that you can see the current programme and video text at the same time. Use the 

blue

 button to 

switch back to Normal operation.

To leave video text, press 

EXIT

.

Summary of Contents for DSR 5600 TS









































Reviews:

No comments

Brands by name

Popular brands

Load more brands