22
Station search
1.
Move the cursor using the
CH
VW
buttons onto the line Antenna and set the satellite you want
using the
VOL
◀
▶
buttons.
2.
Select the line
Search mode
using
CH
VW
and use the
VOL
◀
▶
buttons to select the search
mode you want.
Transponder:
In this mode, only one transponder is searched. You will have to enter its frequency,
polarisation and the symbol rate.
Antenna.
In this mode, the transponders of the stations saved in the list of stations will be
searched for new programmes.
3.
In the line
Encrypted
, select whether the station search should also include encrypted stations,
using the
VOL
◀
or
▶
buttons.
No
= encrypted stations will be ignored.
Yes
= encrypted stations will be included in the search.
The following settings are performed only in the
Transponder
search mode.
4.
Move the cursor using the buttons
CH
VW
onto the line
Frequency
, press the
OK
button and
enter the 5-digit frequency of the channel using the buttons 1-0. Confi rm your entry with
OK
.
5.
Move the cursor using the buttons
CH
VW
onto the line
Polarisation
and set polarisation (vertical
or horizontal) using the
VOL
◀
▶
buttons.
6.
Move the cursor using the buttons
CH
VW
onto the line
Symbol rate
, press the
OK
button and
enter the symbol rate using the buttons 1-0. Confi rm your entry with
OK
.
Move the cursor using the buttons
CH
VW
onto the line
Start station search
and start the search by
pressing the
OK
button.
Now two windows are shown, listing the newly found TV and radio programmes.
The “Status” window shows how far the search has progressed.
- Display:
Scanning
=> Search is active
- Display:
Complete
=> Search is fi nished.
When leaving the menu (EXIT button) you will be asked if you want to save the new programmes
(Yes)
or delete them
(No)
. Use the
VOL
◀
▶
button to make your selection, and confi rm it with the
OK
button.
The newly found programmes are added at the end of the list of stations.
