Basic safety notes
16
02.00|WDB 99 |en
Notes on particular risks
WARNING
Risk of injury due to falling parts when setting up, fitting and
transporting the workpiece direct clamping module.
Parts that have not been properly secured can come loose and
fall down.
• Use suitable lifting equipment and means of transport.
• When fitting the clamping structure, do not enter the danger
zone.
• Wear personal protective equipment.
WARNING
Risk of injury due to falling device, pallet or workpiece if the
clamping pin or the change interfaces on the workpiece direct
clamping modules are loosened erroneously or as a result of
negligence.
• During operation, erroneous or negligent loosening of the
clamping pin must be prevented using suitable countermeas-
ures (disconnecting the power supply after locking, use of
check valves or safety switches).
• The machines and equipment must fulfill the minimum
requirements of the EC Machinery Directive 2006/42/EC;
specifically, they must have effective technical measures to
protect against potential mechanical hazards.
• Wear personal protective equipment.
WARNING
Risk of injury to the operating personnel when transporting the
direct workpiece clamping module or if the clamping structure,
the device or the workpiece falls down.
• Use a crane or a transport truck when transporting.
• During horizontal or overhead applications, the device or
pallet must be secured before loosening to prevent it from
falling.
2.12.4
