Basic safety notes
12
02.00|WDB 99 |en
Notes on safe operation
Incorrect handling of the personnel
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
• Avoid any manner of working that may interfere with the
function and operational safety of the product.
• Use the product as intended.
• Observe the safety notes and assembly instructions.
• Do not expose the product to any corrosive media. This does
not apply to products that are designed for special environ-
ments.
• Eliminate any malfunction immediately.
• Observe the care and maintenance instructions.
• Observe the current safety, accident prevention and environ-
mental protection regulations regarding the product's applica-
tion field.
Maintenance specifications
Follow the maintenance and care instructions. These instructions
are based on a normal working environment. If the product is to
be operated in an environment with abrasive dusts or corrosive or
aggressive fumes or fluids, prior approval must be obtained from
SCHUNK.
Safety during assembly and servicing
During assembly, connection, adjustment, commissioning and
testing, make sure that no accidental operation of the system by
the fitter or other persons is possible.
Compensation module WDB 99-79-32
Observe the minimum clamping depth! If the minimum clamping
depth is not complied with, there is a risk of fracture for the
expansion sleeve and a loss of accuracy.
Carry out an expansion rate check before initial use, after approx.
100 tool changes and at least every 3 months.
During the clamping procedure, the clamping screw must always
be screwed all the way in with hexagon socket wrench.
When using intermediate sleeves, only use SCHUNK intermediate
sleeves!
Always insert intermediate sleeves up to the fixed backstop point.
The bleed screw of the hydraulic system is protected by a pin or
resin. Do not remove this protection!
2.8