SCHUNK NSR-A 100, Assembly And Operating Manual

Page: 31 / 68

Design and Description
06.00 | NSR-A | Assembly and Operating Manual | en | 389722
31
4.4 Coupling interface for NSR-A 100 and NSR-A 160
Proof against over rotation
The pallet changing system NSR-A has a proof against over
rotation which uses mounting studs.
The pallet adapter engages in the fitted bushings of the
changeover head via the mounting studs when joining.
Pallet adapter PKL (0°) Pallet adapter PKL (90°)
Mounting stud Mounting stud
Torsion resistance for pallet adapter PKL (0°) and PKL (90°), without adapter plate
NOTE
• Only an original SCHUNK clamping pin may be used on the
coupling interface with the designated mounting screws.
• Check the screw fitting of the clamping pin at regular intervals
to ensure that it is secure. Observe the tightening torque.
Screw tightening torques [
}
47]
• The pallet adapter must lie fully flat on the contact points of the
pallet changing system. Design changes to the pallet adapter
made by the operator are only permissible with the approval of
SCHUNK.