Maintenance
06.00 | NSR-A | Assembly and Operating Manual | en | 389722
57
7 Maintenance
The pallet changing system is designed for low-maintenance
operation, so that opening and disassembling the clamping
modules is only necessary in exceptional cases.
CAUTION
Risk of injury and material damage when disassembling the
changeover head!
The spring-tensioned cover may move uncontrollably when being
opened, causing injuries as well as damage to the clamping
module.
•
Only have the cover removed by trained specialist personnel.
In cases of doubt, send the pallet-change system to SCHUNK
for repair.
7.1 Maintenance intervals
Maintenance interval
Clamping cycles
for NSR-A 100, 160
Maintenance work
1000 or after 2 weeks
Check functionality of the pallet
changing system,
Information on error-free
function
50.000
Carry out visual inspection and
check for leaks,
Carry out visual inspection and
check for leaks
100,000
Check screw connections
between changeover head and
robot flange and from the pallet
adapter to the clamping pallet
for secure hold,
47]).
As required
Replace seals,
59].