Maintenance
30
02.00 | CRT | Assembly and Operating Manual | en | 1453513
8.6 Changing the ring cylinder assembly
1. Remove the compressed air hose.
2. Remove product from the system/machine.
3. Detach the mounting screws (1) and remove the main
housing (2) from the rear housing assembly (5).
4. Detach the mounting screws (4) and disassemble the ring
cylinder assembly (3).
5. Lubricate the O-rings in the new ring cylinder assembly and the
bore holes in the main housing.
6. Align the new ring cylinder assembly (3) with the centering
bore hole in the main housing (5) and slide it carefully into the
main housing.
7. Fasten the ring cylinder assembly (3) in the main housing (1)
with mounting screws (4).
✓
Max. tightening torque: 1.36 Nm
8. Place the main housing (2) on the rear housing assembly (5)
and fasten with mounting screws (1).
✓
Max. tightening torque: 2.83 Nm
9. Connect all compressed air lines.
10. Mount product onto the system/machine.
