SCHUNK CRT, Assembly And Operating Manual

Page: 18 / 36

Assembly and settings
18 02.00 | CRT | Assembly and Operating Manual | en | 1453513
5.2.2 Pneumatic connection
CAUTION
Damage to the air hoses possible!
The hoses connected to the air connection spindle can be
damaged if the mounting is too tight.
•
Allow hoses to hang flexibly so as not to impair the
compensating movements of the motor.
NOTE
• Observe the requirements for the compressed air supply,
Technical data [
}
13].
• For compensation air connection : For better regulation of the
compressed air, use a self-relieving regulator with air bleed.
• For air connection spindle : For better regulation of the
compressed air, use a 2-way valve and a pressure regulator set
at max. 6.2 bar.
1 Compensation air connection
2 Motor air connection
Item Mounting CRT
1 Compensation air connection [mm] 4
2 Motor air connection [mm] 10