Schulze PRETREATmaker IV, Instruction Manual

Page: 23 / 68

23
E
N
G
L
IS
H
Version 18.02
2.6 Carriage speed settings
3.1 Setting for the pre-coat application range
To change the carriage movement speed, press the settings button ( picture 1 ). Adjust the carriage speed setting as needed ( picture 2 ). By
increasing the carriage speed the ammount of sprayed precoating liquid will be reduced and by reducing the speed the ammount will be
increased. The speed-ammount table is located in the chapter 3.6 .
Prior to commencement of work with the device, range of the pre-coat application should be set. This range is set by buttons on the touch screen
display. (
pictures 1-3 ).
3 .2 Rotating the T-shirt
There is a possibility to set the position of the t-
shirt on the display. To set the right option, press
the maintenance button
(picture 1) and choose
the right position of the t-shirt (picture 2) .
1 2
3. Work with the machine
1 2
3
4
1 2
In case of using normal liquids it is
recommended to use the 650025 nozzles.
Do the test after every change.
Sample:
Texjet Precoating = TP650025
Epson Precoating = TP650025
Brother Precoating = TP800050
In case of using thick liquids it is recommended to mix the liquid with distilled water and use the 800050 nozzles.
For example: Precoating GC-30P5KA should be mixed 2:1 (2 litre water and 1 litre of precoating liquid).
3.3 Automatic Start
If you want to activate the automatic start, press the button (picture 1) . Press the start button to start the machine for the first time. Later the
machine will start automatically after closing the drawer, the start button flashes. If you open one of the covering, the machine will stop. In this case
you have to activate the automatic mode again.
In the manual mode you have to press the start button each time.
2
1
1 . To set width of the pre-coat application, turn
adequately the nozzles 1, 2, 3 or 4 on ( picture 1 ).
2 . To set length of the pre-coat application, use
adequately the button on the touch screen display
in “settings” (
pictures 2-3 ).
3 . The button “double pre-coat” allows selecting
single or dual application of the pre-coat on the
fabric (
picture 4 ).