Schulze PRETREATmaker IV, Instruction Manual

Page: 21 / 68

21
E
N
G
L
IS
H
Version 18.02
Information and Education
According to § 81 industrial relations law and § 14 employment protection law the employer has to make arrangements to give all information
about the function and the range of application to the user. In particular the user needs to be acquainted with the complete manual and be explicitly
informed of the dangers of working with the machine. The details have to be explained in a coherent form and language. Every user is obligated to
a safe usage of the machine and to read the instruction manual before start working with the machine. Using the machine means, that the operator
has read the instruction and is aware of possible risks of working with the machine.
Safety arrangements
In order to ensure optimized safety, please read the instruction manual precisely. Only one person is allowed to work on the machine at the time.
The machine has to be under supervision the whole time, when it is working. Supervise the machine till it is switched off and the power plug is
pulled out. The device is equipped with a power plug. Special attention should be paid to the socket and presence of the connected safety circuit
inside. Very important! The machine may be connected only to an installation provided with a protection against electric shock. There should be no
unauthorised persons near the machine while it is working. The machine has to be installed at a place with enough space around the machine. The
space in front of the machine has to be wide enough. Nothing can disturb an operator at work. Do not install the machine in doors, floors or busy
places. The power plug has to be pulled out from the power supply, while maintenance. All wires should be placed in a safe way, to make sure they
will not pose a threat for the person working at the machine or passing it. In case of damages or untypical signals from the machine, please
disconnect the machine from the power supply, contact the service and do not work with the machine, till the problem is solved. All repairs should
be performed after consulting the service. Do not remove machine covers while the machine is working.
Other risks and dangers
There are some movable elements on the machine, which can cause injuries of hands or fingers. For reasons of workability, these elements
cannot be eliminated. It is important to work with the machine with great care and be alert to avoid other dangerous situations. The machine should
be operated in accordance with the manufacturer’s recommendations to avoid risks. The machine complies with the essential requirements laid
down in regulation for machines. Above information has been worked out in accordance with the standards PN-EN 12100:2012. The machine is
constantly upgraded in order to improve its safety. All comments regarding the contents of this manual can be addressed to the distributor or
manufacturer.
2.1 Warranty terms and conditions
2.2 Notes regarding transportation
2.3 Supply voltage 100 - 240 VAC
2. 4 Preparation of the machine for operation
2. Initiation
The machine has to be operated with a precoating liquid for fabrics, to prepare them for DTG printing. Cleaning MUST be done with destilled water
only! Other liquids may damage pumps or other components of the machine. Damages caused by unauthorized liquids are excluded from the
warranty.
The PRETREATmaker IV comes with a 12 months warranty. This warranty includes the whole construction of the machine, mechanical parts,
electronics, drawer with rails, casing, pumps, electronic valve and pipes.
Consumption items such as brass/stainless steel nozzles, seals and filters are excluded from the warranty.
The PRETREATmaker IV is packed with protective film and fastened to a pallet. Right after receipt of the machine, condition of the packaging
and the machine itself should be controlled. If the machine has to be sent to another place later on, it should be packed and placed on the pallet in
the same way. The device must be cleaned for further transportation and containers for water and pre-coating liquid – emptied.
The PRETREATmaker IV can be connected to the installation 100-240 VAC The device is equipped with a plug. Special attention should be paid
to good condition of a socket and presence of connected safety circuit inside.
Very important! The machine may be connected only to an installation provided with a protection against electric shock.
Caution: please do not connect this machine to any other outlet (socket) than those equipped with ground-fault protection ELCB (earth
leakage circuit breaker). In case of doubt ask your licensed electrician to check the wiring. Connecting the machine to a sochet that is not
earthed or where the earthing does not work properly is hazardous to health and dangerous for the machine. Any damages arising from an
improper plugging invalidates the warranty.
The device may be operated by a person trained and acquainted with the service manual. After removing the unit from the pallet and remove the
protective film should be mounted nozzles. The nozzles are attached to the machine with the power cord, filter and washer. The nozzles must be
put together and installed into the machine
(pictures below) .
1
4
2
5
3
6