26
E
XPERT
SETUP
MENU
CX
PLUS
In order to change from the quick START SETUP menu to the EXPERT SETUP menu of the CX plus,
press the key
“
”
or
“
”
. Now a PIN has to be entered. Here, the standard PIN is
242
.
NOTE:
The PIN can be changed in the SETUP menu 608. No matter which PIN was set, the EXPERT
SETUP menu can always be entered with the master PIN
“242”. If the PIN has been set to “000”, the
EXPERT SETUP menu is not protected by a PIN anymore. All SETUP menus are unlocked without
entering a PIN.
Enter the PIN (
242
) and confirm with the key
“
”
. The previously hidden menus 200 to 800 can now be
selected with the keys
“
”
and
“
”
.
The key
“
”
can be used to enter the submenu.
The EXPERT SETUP menu of the CX plus is divided into seven groups. The menu items in these groups
are grouped logically. The following groups exist:
100 Quick START setup
Contains all the important settings for commissioning from the setup menus 200 to 400. This menu is
always visible.
200 Options MEASUREMENT
Contains settings in order to adjust the measurement of the CX plus to the network conditions.
300 Settings CONTROL
Contains settings in order to adjust the control to the system requirements and to optimise it.
400 Settings STAGE DATABASE
The stage parameters are set in the stage database. When the stage recognition is switched off, the
stage size must be entered manually here for each individual stage.
500 Settings ALARM
Almost all alarms and monitoring functions can be activated / deactivated and limit values can be set in
the alarm menu.
600 Reset menu
Allows resetting all made settings, values saved by the controller and counters. Additionally, it is possible
to call up the software version of the device and to set the password (PIN) for the expert setup menu.
700 Settings MODBUS (only option -MB)
Contains settings in order to parametrise the MODBUS-RTU communication interface (RS485).
800 Backlight Options
Contains settings for parameterization the time span for lighting up the display during commissioning
services.
