Caution
Safety precaution
Caution
Caution before use.
・ Location which will be gotten water
・ Locations which receive direct sunlight
・ Dew condensation place
Do not use AC plug covered with dust.
Do not use and keep the FGJN under
the following circumstances.
Please use the FGJN in operating
temperature in range ０℃～４０℃ .
It might the cause of the fire.
When the FGJN is dirty, please wipe with dry soft
cloth, or please give the cloth soak in detergent
which has mixed with water, then wring the cloth and
wipe with it. Do not use a volatile chemical such as
benzene, thinner, and alcohol.
If you use FGP beyond above temperature, FGP
might operate unusual.
１． Do not press the button with
a sharp-pointed object.
２． Do not load bending direction or twisting direction.
PEAK
ZERO
MEM
UNIT
PEAK
ZERO
MEM
UNIT
PEAK
ZERO
MEM
UNIT
FGP can measure pulling load and compression load. Do not load bending
direction or twisting direction. Though FGJN has a stopper which protects
the sensor from careless operation, this stopper is helplessness for impact
load, bending direction, and twisting direction.
Bending direction
Twisting direction
We recommend the force gauge to be checked
and calibrated regularly. Though it is depend on
the frequency of use and loading, the accuracy of
measurement will be declined with time.
３． Do not fall the force gauge.
Do not fall the force gauge
into the ground. Sensor
m i g h t b e b r o k e n a n d
you cannot get accurate
measurement value.
PEAK
ZERO
MEM
UNIT
４． Do not use the force gauge in location which will be gotten water.
This force gauge is not water
proof. Please do not operate
the force gauge in location
which will be gotten water.
PEAK
ZERO
MEM
UNIT
５． Measuring very small loading
Tracking is ON at the factory
default. When you measure
small load, please turn the
tracking OFF. ( ⇒ Please refer
4.4. Tracking)
PEAK
ZERO
MEM
UNIT
Please operate the force gauge within
operating humidity range; 35 ～ 85RH.
If you use the force gauge beyond the above range,
it might produce improper operation.
・ Dusty, salinity and iron content environments
・ Location which will be gotten oil and chemical
・ Corrosive and Flammable gas environment
Overload
