MVPHD-24 Operations Manual Version 0.9.0 page 30 of 74
October 26, 2020
Menu:
Free Run Freq Adj:
This menu is used to vary the MVPHD-24’s master clock frequency while in Free Run mode.
Use the Knob or +/- buttons to adjust.
Menu:
Genlock Status:
This menu provides detailed status information on the selected genlock source.
The lock status is displayed to the right of “Genlock Status:” on the top line of the menu.
“LOCKED” will appear when the MVPHD-24 is both frequency locked and
vertically locked.
“UNLOCKED” will appear when the MVPHD-24 is not frequency locked, or
it is not vertically locked. This can occur if the MVPHD-24’s frame rate does not
match the genlock source.
The second line of the status menu indicates the selected genlock source, and a description
of the signal detected.
“BNC Input” refers to the rear panel
GENLOCK LOOP
BNC connectors.
“SDI Input” refers to the serial digital SDI input.
The third line of the status menu indicates the lock status of both frequency (Clk) and Vertical.
The bottom line of the status menu will indicate warnings or other conditions.
The “INCORRECT FRAME RATE” message will appear if the MVPHD-24’s
frame rate does not match the genlock source.
The “FREE RUN” message will appear if
Free Run
is the selected genlock source.
AUDIO:
(FUTURE RELEASE)
This button is used to access menus for audio processing.
Menu:
No menus available for the function.
