Schindler CAL MEDIA MVPHD-24 Operation Manual Download Page 26 | Manualshive

Page: 26 / 74

background image

MVPHD-24 Operations Manual Version 0.9.0 page 26 of 74
October 26, 2020

COLOR CORRECT:

This button is used to access menus for color correction.

The Color Correct controls (Gain, Gamma, and Pedestal) may be used to adjust the video image in
the RGB color space. All output signals are affected by these controls.

Note: a special icon will appear on the right side of the display when any Color Correction control
is set to a non-unity value.

Menu:

Color Correction:

This menu is used to enable or disable all Color Correction controls.

When set to

ON

, the Color Correction controls (Gain, Gamma and Pedestal) are active.

When set to

OFF

, the Color Correction controls are bypassed (unity gain) and any

control settings are ignored.



Use the Knob or +/- buttons to adjust.

Menu:

Output Gain (%): RGB

This menu is used to adjust the red, green and blue gain of the output video signal.

Adjustments are made individually to the red (RED), green (GRN), or blue (BLU)
channels; or all channels (RGB) simultaneously.   The color channel is selected by
pushing the knob.  The top line indicates the color channel selected for adjustment.
Range of adjustment is 0 to 200%, with a default value of 100%.



Push Knob to select color channel for adjustment.



Use the Knob (rotate) or +/- to adjust.

Menu:

Output Gamma: RGB

This menu is used to adjust the red, green and blue gamma of the output video signal.

Adjustments are made individually to the red (RED), green (GRN), or blue (BLU)
channels; or all channels (RGB) simultaneously.   The color channel is selected by
pushing the knob.  The top line indicates the color channel selected for adjustment.
Range of adjustment is 0.45 to 2.20, with a default value of 1.00.



Push Knob to select color channel for adjustment.



Use the Knob (rotate) or +/- to adjust.

Menu:

Output Pedestal (%): RGB

This menu is used to adjust the red, green and blue pedestal (black levels) of the output
video signal.  Adjustments are made individually to the red (RED), green (GRN), or
blue (BLU) channels; or all channels (RGB) simultaneously.   The color channel is selected
by pushing the knob.  The top line indicates the color channel selected for adjustment.
Range of adjustment is -58.4 to +58.3, with a default value of 0.



Push Knob to select color channel for adjustment.



Use the Knob (rotate) or +/- to adjust.

«
...
24
25
26
27
28
...
»

Summary of Contents for CAL MEDIA MVPHD-24











































































Reviews:

No comments

Related manuals for CAL MEDIA MVPHD-24

Brand: ABB Pages: 10

Brand: Cablematic Pages: 2

Brand: KROHNE Pages: 67

PX348 PxArt Audio

Brand: PXM Pages: 25

Brand: Roland Pages: 6

Brand: SAJ Pages: 59

ALL-USB-RS422/485

Brand: Allnet Pages: 6

samlexsolar SPB-EXPLORE200

Brand: Samlexpower Pages: 2

Brand: Power Fist Pages: 2

Brand: Vacon Pages: 102

Brand: FOR-A Pages: 28

blueplanet 87.0 TL3

Brand: Kaco Pages: 115

CC15-xxxx-Sxx-E Series

Brand: TDK-Lambda Pages: 11

Brand: Metra Electronics Pages: 3

Brand: ADF Web Pages: 31

Brand: PEC Pages: 26

SinePower SP162

Brand: Waeco Pages: 120

Brand: Hoymiles Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands