Schindler CAL MEDIA MVPHD-24 Operation Manual Download Page 64 | Manualshive

Page: 64 / 74

background image

MVPHD-24 Operations Manual Version 0.9.0 page 64 of 74
October 26, 2020

Chapter 9

Updating the Firmware

Chapter 9 – Updating the Firmware

The MVPHD-24 can be quickly and easily updated using a MMC or SD memory card, or remotely through Dashboard.

Obtaining New Firmware

The current version of firmware can be obtained from California Media Engineering (

www.calmedia.com

Preparing Firmware Files

The firmware will be provided as a .zip file. Before it can be used, the file must be unzipped.

Be certain that no errors occur during the unzip process.

Once unzipped, the firmware update should be a folder with a “.cme” extension, containing several files.

To update the MVPHD-24 using a MMC or SD memory card, copy the entire folder to the memory card’s root

directory.

Note: The MVPHD-24 can only have one folder with a “.cme” extension. If the memory card already has
a “.cme” folder from an earlier update, then the earlier folder must be moved from the root directory or
renamed or deleted. Do not combine files from other versions into the same “.cme” folder, otherwise the
MVPHD-24 may install the wrong firmware (.osx) file.

To update the MVPHD-24 using Dashboard™, copy or move the folder to a location accessible from Dashboard™.

«
...
62
63
64
65
66
...
»

Summary of Contents for CAL MEDIA MVPHD-24











































































Reviews:

No comments

Related manuals for CAL MEDIA MVPHD-24

Brand: C&C TECHNIC Pages: 2

Brand: Chemtronics Pages: 20

Brand: EtherWAN Pages: 13

Brand: Enerdrive Pages: 2

FL MC 10BASE-T/FO G850

Brand: Phoenix Contact Pages: 7

Brand: Trycom Technology Pages: 20

Brand: Planet Pages: 36

Brand: Casti Pages: 4

Brand: Missing Link Pages: 8

Brand: Sungrow Pages: 11

E70ACMS4 Series

Brand: Lenze Pages: 20

Brand: Duracell Pages: 37

Brand: Sovereign Pages: 4

Brand: Sveon Pages: 45

VIDEO SCOOTER BT

Brand: Intenso Pages: 108

Brand: Extron electronics Pages: 54

Brand: Cable Electronics Pages: 28

Brand: ADF Web Pages: 36

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands